Manifold with shut-off valves 5 outlets x 3/4" x 1/2" male. MPF

We will send the material to you at:
Manifold with shut-off valves 5 outlets x 3/4" x 1/2" male. MPF with male thread (or comb) - a kind of distributor, which is an important plumbing element of the system of cold, hot water and heating.
The immediate function of a manifold with shut-off valves in a water supply system is to distribute a single water flow into several equal or different pressures. Two opposite sides of the unit are provided with a 1" threaded connection (female thread on one side and male thread on the other) for connection to the mains and connection of the "combs" to each other. The free end of the manifold is fitted with a plug or an additional plumbing device such as a diaphragm shock absorber or manifold elbow/tee to install an air vent, thermometer, remote thermostat gauge or drain faucet.
The outlets have ball valves that allow the water flow to be opened and closed on each individual branch. The ball valve is opened or closed by turning the metal handle 90 degrees. The manifold is complete with blue and red coloured handles. The user, depending on whether the manifold is connected to hot or cold water, sets the knobs in red or blue. The handles are made of metal with low thermal conductivity to provide protection against burns when connecting the manifold to hot water.
Outlets in diameter 1/2" are provided with seats for 1/2" Eurocone-type connectors for connection of metal plastic or PEX pipes in diameter 16 mm with wall thickness 2.0 mm.
If it is necessary to connect a plumbing fixture to this manifold using a threaded connection and/or a flexible inlet, we recommend installing a "Eurocone-Flat" adapter, which protects the gasket from being cut by the edges of the thread.
When installing the manifold, it is necessary to securely fasten it using special manifold fasteners and/or pipe clamps with a rubber seal of the appropriate diameter. A poorly secured switchgear assembly can lead to leaking connections and damage to the pipework.
The hot stamping process manufactures this manifold.
The manifold is made of high quality brass CW617N and has a nickel coating of at least 7 microns, making it suitable for use in drinking water systems due to the reduced lead content in the alloy, as well as in other environments that are not aggressive to the materials manufacturer.
The use of a manifold in water supply systems eliminates unnecessary control and shut-off valves. The manifold ensures that the water system has the same pressure for the consumers.
The manufacturer of this manifold is MasterProf.
Connection size 1
Type of connection 1
female thread
Connector size 2
Type of connection 2
male thread
Number of outputs
Connection size of outputs
Type of outputs connection
ball valve
Body material
brass CW617N
Type of coating
nickel electroplated anticorrosive 12 μm
Working pressure
up to 10 Bar (1.0 MPa)
Operating temperature
0°C to +110°C
Fabrication method
hot forging
Height, mm
Width, mm
Depth, mm
Weight, g
Work environment
water, compressed air and other media not aggressive to product materials

How many product items is on your shop shelves?

An ideal assortment planning by MasterProf will help you arrange more products on your shelves and increase your profit.

Shop retail space, m²
730 000
1 985 000
3 000
We will provide you ready-made solutions for opening an engineered plumbing shop. We will analyze current indicators and develop a plan for optimizing and trade turnover increase.