1/2" Bulkhead Fitting w/ Gasket (plastic)
Water is the basic working environment for the bulkhead fitting, including hot water, but it can be also used in other environments which are not aggressive to its material. The fitting is easily installed and firmly fixed in place.
Before installation make sure to create a 22 mm hole in a container/tank, then fix the fitting from inside the container and seal it with a gasket from the outer side. After that, fix the lock nut and connect the tap and other parts. A gasket and a plastic plug are included in the kit.
Additional product information:
The plastic bulkhead fitting provides connection to any part of a container. This allows to connect an automatic refill unit and to intake the water from the water supply or irrigation tank. Please note that the refill unit should be located at a maximum height of the tank, whereas the water intake fitting should be located at a height of 7-10 cm above the tank bottom to allow intaking clean water free from sand or residual sludge.
Summer House Items
Its structural design makes possible easy...
May be used for hose...
How many product items is on your shop shelves?
An ideal assortment planning by MasterProf will help you arrange more products on your shelves and increase your profit.